Skip to main content

    How to value a stock: multiples, discounted cash flow and a fair value range you can defend

    To value a stock, compare its price with what the business earns, using multiples like P/E and a discounted cash flow model, and turn the result into a range rather than a single target. Here is how each method works and where it misleads.

    Peakwise Research · · 6 min read

    Contents

    To value a stock, you compare its price with what the business earns or generates in cash, and you do it in at least two ways: with multiples such as the P/E ratio, which show what the market pays for similar companies, and with a discounted cash flow model, which estimates what future cash is worth today. The honest output is not one target price but a fair value range with clear assumptions. This guide explains both methods, shows where each one misleads and ends with a short routine you can use on any stock.

    Why valuation matters even for great companies

    A wonderful business bought at the wrong price can be a poor investment for years. Cisco in 2000 is the classic example: the company kept growing for two decades, but investors who bought at the peak waited a very long time to break even. Valuation is the question of what you pay for what you get.

    Method 1: Valuation multiples

    A multiple divides the price (or enterprise value) by a measure of profit, cash or sales. It answers: how many years of current earnings am I paying for?

    MultipleFormulaBest forWatch out for
    P/EPrice ÷ earnings per shareProfitable, stable companiesOne-off gains or losses distort earnings
    EV/EBITDAEnterprise value ÷ EBITDAComparing companies with different debtIgnores capital spending
    Free cash flow yieldFree cash flow ÷ market valueMature cash generatorsLumpy investment years
    Price to salesMarket value ÷ revenueYoung companies without profitSays nothing about margins
    Price to bookPrice ÷ book valueBanks and insurersMeaningless for asset-light companies

    A multiple only means something in comparison. Use two:

    1. Against the company's own history. Is the P/E high or low compared with its ten-year range, and has the business changed since?
    2. Against close peers. Visa against Mastercard, Coca-Cola against PepsiCo. Comparing a bank with a software company on P/E tells you nothing.

    The P/E ratio explainer and our guide to what a good P/E ratio is go deeper into the most used multiple.

    Method 2: Discounted cash flow (DCF)

    A DCF estimates the free cash flow a company will generate in the future and discounts it back to today, because money in ten years is worth less than money now.

    The steps:

    1. Forecast free cash flow for five to ten years: revenue growth times margin, minus investment.
    2. Estimate a terminal value for everything after the forecast period, usually with a modest long-term growth rate.
    3. Discount all of it to today using a discount rate that reflects risk, often between 7 and 10 percent for large companies.
    4. Subtract net debt and divide by the number of shares.

    The weakness is sensitivity. Change the long-term growth rate by one percentage point or the discount rate by one point and the result can move by 20 to 30 percent. That is not a reason to skip DCF. It is a reason to run it with several scenarios and to show the assumptions.

    Method 3: Reverse DCF

    Instead of forecasting and calculating a value, start from today's price and ask: what growth and margins does this price imply? This turns valuation into a plausibility check.

    If a company growing 8 percent a year is priced as if it will grow 20 percent for a decade, you know what has to go right. Reverse DCF is often the most useful single valuation tool for private investors, because it focuses on one question you can judge: is that implied growth realistic?

    From numbers to a fair value range

    Combine the methods into three scenarios:

    ScenarioAssumptionsPurpose
    LowSlower growth, lower margins, higher discount rateWhat if things go wrong?
    MidYour best estimateYour central case
    HighFaster growth, better marginsWhat if things go right?

    If the current price sits near your low estimate, you have a margin of safety. If it sits above your high estimate, the market expects more than your best case. A wide range is not a failure. It honestly shows how uncertain the future is.

    Common valuation mistakes

    • Using one year of earnings at a cyclical peak or trough. Use an average across a cycle for cyclicals such as carmakers or chemicals.
    • Comparing across sectors. Software and utilities have structurally different multiples.
    • Ignoring dilution. Stock-based pay increases the share count and lowers value per share.
    • Treating a precise target as precise. A target with two decimals is still a guess.
    • Forgetting the balance sheet. Two companies with the same P/E can carry very different debt.

    Valuation by type of company

    • Mature, profitable companies (consumer staples, large tech): P/E, free cash flow yield, DCF.
    • Cyclicals (autos, chemicals, steel): normalised earnings across a cycle, EV/EBITDA, price to book in downturns.
    • Banks and insurers: price to tangible book value and return on equity.
    • Young growth companies: price to sales plus a clear view of the path to profit.
    • Real estate: net asset value and cash flow per share.

    Our company articles name the right yardsticks for each business, for example JPMorgan for a bank or BASF for a cyclical chemicals group.

    How AI helps with valuation

    AI is useful for the mechanical parts: gathering historical multiples, building a first DCF, running scenarios and explaining which assumption matters most. It is risky when it presents a number without its inputs.

    The Peakwise AI stock analysis gives a fair value range with a low, mid and high estimate and states the method used, for example discounted cash flow or multiples. Treat it as a starting point to question, not as a target. Ask the chat next to the report which assumption moves the result most, and check that assumption yourself. For the 50 largest S&P 500 companies, the valuation part of the AI stock score compares earnings yield and free cash flow yield across the list.

    A 20-minute valuation routine

    1. Note the P/E and free cash flow yield, and compare them with the five-year average.
    2. Compare the same figures with two close peers.
    3. Run a reverse DCF: what growth does the price imply?
    4. Write a low, mid and high case with one sentence of assumptions each.
    5. Decide where today's price sits in that range.

    This guide is for education and is not investment advice.

    Frequently asked questions

    Compare the price with what the business earns or generates in cash. The two common approaches are multiples, such as the P/E ratio compared with history and peers, and a discounted cash flow model that estimates future cash flows and discounts them to today. Combine both into a fair value range.

    There is no single best method. Multiples are quick and show what the market pays for similar companies. Discounted cash flow forces you to state assumptions about growth and margins. Using both and comparing the results is more reliable than relying on one.

    Work out what growth and margins the current price implies, then judge whether that is realistic. If the business must grow much faster than it ever has to justify the price, the stock is priced for perfection.

    Every valuation rests on assumptions about the future. Small changes in growth or the discount rate move the result a lot. A low, mid and high estimate shows that uncertainty honestly.

    Analyze a stockin one report

    Financials, news, analyst consensus, a fair value range with its method, and risks and opportunities for any listed company.

    Free for 7 days. Not investment advice.